Silbo Aa1 Android HMI and KIOSK


HMI’s are the interfaces which facilitate translating inputs from the operator to machine and the status and error back to operator in all automated machines. With the introduction of Android, the HMI’s are more flexible and user can have better interaction with the machines and Vice Versa. Invendis has created HMI’s based on Android to unleash the flexibility of Android and create a next gen HMI with more feature and yet economical.

The KIOSKs are found in many places be it in large malls, airports, restaurants, large consumer repair /service centres. These KIOSKs help people to navigate, place the order, load digital advertisements etc. Invendis has created compact controllers which can drive as big as 21 Inch screen with touch screens which comes with HDMI, high end computation processor which enables smooth navigation through menus and great user experience.


Silbo-Aa1



The Silbo-Aa1 is powered by a 1.5GHz Mediatek Quadcore ARM Cortex A35 processor. The SBC has SD Card, Wi-Fi, Bluetooth, USB ports, HDMI, LCD with capacitive touch, Audio, Camera Interfaces, is powered by a USB Type C connector, has a built-in charger for battery backup, and runs Android. The device can be powered through external battery at 12V.

Technical Specifications


Mediatek i300A Based( Quadcore ARM Cortex A35 running at 1.5GHz)


2GB DDR4, 16GB eMMC


Android 9/10


Single App Mode Support


SD Card Support


Wi-Fi 802.1ac dual band Support – Can act as Client or Access point


Bluetooth (BT4.2 and BLE5.0) Support – Support SigMesh for custom BLE Sensors


Two USB2.0 Ports, can connect external LTE Dongle, Thermal Printer, Fingerprint Sensor, camera etc


HDMI Support


Headphone Out and MIC in support


Expansion M.2 connector to add Ethernet, LTE Modem,RS485,Digital Input, Relay outputs and Analog inputs for various sensors etc


Android USB Debug Port


USB Type C 5V input with Built-in charger for Battery backup including auto Power recycle option


100mm X 70mm board


Application


HMI in Factory and Medical electronics


Tablet PC


Silbo-Ac1



The Silbo-Ac1 is powered by a 1.5GHz Mediatek Quadcore ARM Cortex A35 processor. SOM has 5 USB 2.0 ports, can connect external LTE Dongle, Thermal Printer, Fingerprint Sensor, camera etc. The device can be powered through external battery at 12V.

Technical Specifications


Mediatek i300A Based( Quadcore ARM Cortex A35 running at 1.5GHz)


2GB DDR4, 16GB eMMC


SD Card Support


Wifi 802.1ac dual band Support – Can act as Client or Access point


Bluetooth (BT4.2 and BLE5.0) Support – Supports audio


5 USB2.0 Ports, can connect external LTE Dongle, Thermal Printer, Fingerprint Sensor, camera etc


Support 21” Dual LVDS display with Capacitive Touch


On Board 4G LTE Module with Single SIM


Headphone Out and 10W Stereo speaker outputs


Optional MIPI CSI cameras


Android USB Debug Port


12V input


Application


HMI in Factory and Medical electronics


Tablet PC