Silbo Sa1 SOM and CPU Modules


SOM and CPU modules are compact electronic control boards used in multiple products. The OE’s can directly use these to create IoT or electronic control units which perform intended gateway or control functions.

Our SOM and CPU’s are compact design and comes with varied specs in terms of computation force, memory, RAM, I/O etc. The modules also come with Open SDK, which can enable OE’s to write their own codes and solutions.


Silbo-Sa1



P-Series CPU Module is a Linux-based general-purpose CPU Module with one 10/100 Ethernet port and one USB interface port switch. This module comes with a standard SDK and cross-compilation tool chain, allowing users to create custom applications based on this CPU Module.

Technical Specifications


MIPS 24KEc CPU at 580Mhz with 32MB Flash ,128MB DDRRAM, SD card

Linux OS with capability of running C, Python and Lua applications


One 10/100 Ethernet Port


Wi-Fi AP with Encryption


One USB interface port


UART, I2C, GPIOs


Simple 2.54mm pitch Header Connector


3.3V powered


Application


Good for OEM’s to develop IoT / gateway units.


Comes with plug and play architecture which can be easy to implement on a IoT device with other peripherals.


Silbo-Sb1



Renesas 64bit ARM RZG2/M/N/H processor is used for running CIP Linux, along with capable of running edge video analytics which can be displayed through LVDS/HDMI signals. It includes digital inputs and a temperature range of –20 to 60 degrees Celsius.

Technical Specifications


SMARC 2.0 Form Factor (82mm X 80mm)


Running CIP Linux on Renesas 64 bit ARM RZG2/M/N/H on Cortex A53 and Cortex A57 cores, 2/4 GB LPDDR4, 32GB eMMC Flash


One Gigabit Ethernet Phy


LVDS/HDMI signals for connecting Display


One USB 3.0 and Two USB 2.0 ports


Two MIPI CSI ports for camera


Two PCIe 2.0 X 1 ports


2 X 2 MIMO Wi-Fi and BT


Optional SATA in case of RZG2N


UART, SPI,I2C, I2S, CAN, SDIO, GPIOs Signals available


RTC


Capable of running edge Video Analytics


SDK available for custom software development


Temperature grade of -20 to 60 deg C


Application


NVR with Video Analytics


IP Camera with Video Analytics


Secure Gateway


Silbo-Sc1



These are common carrier board for RZG2M/N/H SMARC 2.0 SOM boards. The device can be powered through external battery at 12V, and it includes digital inputs and a temperature range of 0 to 70 degrees Celsius.

Technical Specifications


Common Carrier Board for RZG2M/N/H SMARC 2.0 SOM boards


One Gigabit Ethernet Port


One 7-inch LVDS Display connector and one HDMI connector


One USB 3.0 and Two USB 2.0 ports


Two MIPI CSI ports for camera


Two M.2 Slots for Google Coral TPU and SSD


One Mini PCIE Slot for 4G module


SD card connector


RS232 and RS485 Ports


Audio Line In and Line out Connectors


One CAN Port


One RTD Input port


12V DC Powered


Ambient Temperature of 0 to 70 deg C


Silbo-Sd1



The Renesas RZG1/E processor is used in the RZG1/E SOM CPU MODULE. The RZG1/E series is designed to support applications such as Industrial IoT Gateway, HMI, PLCs, Embedded Video Analytics, NVR, DVR, and others across a variety of industry segments, including substation automation, building/factory automation, ATM eSurveillance, Telecom Towers, and so on.

Technical Specifications


Running Linux on Renesas 32 bit ARM RZG1/E ARM Cortex A7 1 GHz dual core processor, 1GB DDR3,4GB eMMC Flash , Micro SD Card


Optional Secure Boot


One 10/100 Ethernet Phy


RGB signals for connecting Display


Two USB ports


Two BT.656 ports


UART, SPI,I2C, GPIO Signals available


RTC battery Backup


Capable of running basic edge Video Analytics


SDK available for custom software development


Optional Secure Boot, Secure Storage, Secure Communication


Temperature grade of -20 to 60 deg C


Application


Secure Gateway


Industrial grade DVR/NVR